Add motion to cameras, lights, objects, and more to bring your shots to life
Size: 14x6x5cm
Weight: 130g
Compatible modules/moves:
Travelling, panning, tilting, and follow focus
Power Supply:
12V battery/mains power supply
Main materials of construction:
aluminum, stainless steel

Create your own automatic motion control system with PAP nema 17 and nema 23 motors
Use it to create perfectly synchronous and fluid rotation and translation movements of up to 4 axes in your DIY system.
Incorporate the modules you want to give the camera movement
The panning (horizontal rotation), tilting (vertical rotation), and follow focus modules allow precise control of camera movements.
Unlimited control via API
You will be able to create the movements from any third-party software/App and communicate them through the use of commands in a serial terminal.
The control unit connected to the PC/Mac via USB will be in charge of communicating the movement commands to the controller with its wireless system up to 100m range.
You will be able to use the library of commands to create different types of movements based on the positions to reach and the speed in the position reached by each one of the connected axes.
Advanced motor motion control
Versatility, precision, and smoothness
Simple and agile connection system so you can connect the module or motor of your choice.
Advanced multi-axis synchronous motion creation firmware with controlled accelerations for maximum fluidity.
Noxon Control System
Work without the use of software + PC thanks to the agile and intuitive wireless control system included.

– Pocket size.
– 2.2″ LCD screen.
– Resistant to falls thanks to the silicone protection case that it includes.
– Agile and intuitive use thanks to its unique rotary button. Programmed movement in 5 clicks.
– USB 2.0 type A cable for charging and connection.
– Range of up to 100 m (in direct vision situation) in the wireless version.
Perform any type of work thanks to its advanced control modes

Directly control the speed and direction of any of the travelling, panning, or tilting slider movements.
40 speeds available.

Program movements with up to 3 control points combining the axes as you like.
Ejemplo:
De punto 1 a punto 2 (solo travelling)
De punto 2 a punto 3 (travelling + panning + tilting)
Establece las aceleraciones de arranque y parada para suavizar al máximo los movimientos.

Shoot-move-shoot movement (the camera remains still during the photo shoot).
Up to 100 hours length for a timelapse project.
Fast parameter configuration (frames, lapse).
Comunication with the camera when shooting (3,5mm minijack port).
Ramp mode control for exposure time while shooting sunrises and sunsets.
Possibility to perform acceleration ramps.
Possibility for movement preview.
It is possible to disconnect the remote during the execution and the slider will keep working.

Swift configuration of the number of shots to be taken.
Possibility of frame by frame movement in both forward and backward directions.
Possibility of moving to any frame position in just one step.

It allows 360 photography and rotation video by incorporating the rotary table accessory into the panning module.
It is possible to control:
The full angle that you want to rotate.
The speed for your full motion video.
The number of photos for the 360 photo/panorama movement.
The time interval between the photos to automate the movement (the slider emits trigger signals to the camera at each position of the 360 photo).

Do Stop motion using Dragonframe
Create stop motion projects controlling the slider directly from the Dragronframe software thanks to the dedicated wireless bridge.
Become the best advertisement producer
Use the Turntable mode with our rotary table accessory and panning module.

Sync Connect
One controller to command any of our products.


Lifetime guarantee
*Check conditions.

14 days money back guarantee

Best prices in professional equipments

No import duties within the EU
4 axes universal/programmable motor controller module
From: 260,00€ IVA/TAX excl.
Build your own motion control system with this controller module that allows you to move up to 4 stepper motors (traveling, panning, tilting, follow focus)
Operating modes: Manual, Automatic, Timelapse, Stop-motion, TurnTable, etc.
Description
- Controller module.
- Connection module for motors.
- Wireless remote controller.
- 12V power supply.
- 2m power extension cable.