Get amazing aerial shots flying your VR360 camera
Size: 15.5*12*18.5 cm
Weight: 770 g
Minimum speed: 5 mm/s
Maximum speed: 1375 mm/s
12V battery / 24V battery
Main construction materials:
Carbon fiber, stainless steel A2, Delrin
Horizontal loading capacity: 6Kg
Save equipment space thanks to its compact size
Your camera will be flying in less than 10 minutes
You will assemble the cablecam anywhere in a record time thanks to our achoring and tensioning system.
Small but capable
Loading capacity of up to 6kg
Save postproduction time with an invisible hanging system
The minicablecam compact size won’t interfere in the camera’s FOV
Move your camera with up to 30 degree tilt at high speed
Noxon Control System
Intuitive and swift control system using either a wired or a wireless remote
– Pocket Size.
– 2.2″ LCD screen.
– Fall-proof thanks to the protective silicone cover.
– Swift and intuitive thanks to a single rotating button. Program a movement in just 5 clicks.
– Uses a standard USB 2.0 type A cable.
– 100 m line-of-sight range in the wireless version.
Performs any work thanks to advanced control modes
Live control of speed and direction of the travelling movement.
40 speeds available.
Programmable movements with up to 3 reference points, allowing for speed and direction changes.
From point 1 to point 2 (198 cm of travelling to the right, speed 11)
From point 2 to point 3 (750 cm of travelling to the left, speed 40)
It stablishes start and stop accelerations in order to soften the movements to the maximum.
Shoot-move-shoot movement (the camera remains still during the photo shoot).
Up to 100 hours length for a timelapse project.
Fast parameters configuration (frames, lapse).
Comunication with the camera when shooting (3,5mm minijack port).
Ramp mode control for exposure time while shooting sunrises and sunsets.
Possibility to perform acceleration ramps.
Possibility for movement preview.
It is possible to disconnect the remote during the execution and the slider will keep working.
Swift configuration of the number of shots to be taken.
Possibility of frame by frame movement in both forward and backward directions.
Possibility of moving to any frame position in just one step.
It allows programming the exact time where the camera goes to different positions and even the times where it will remain stopped in the reached position.
Programs the exact time where the camera goes to different positions and even the time where it will remain stationary in the reached position.
This mode is specially useful for systems that move long distances.
It can be used in events, musicals and other situations where the time should be controlled.
A single remote to control all of our products.
Advanced motor movement control
Ultrasmooth movements thanks to the new accelerating system.
High precision with stepper motors and electronics capable of performing movements of 0.03 mm.
Long battery life
The included battery is developed and built by Noxon. The battery running time lasts up to 6 hours of continuous movement.
Larger 12V capacity third party batteries or multiple parallel connected Noxon batteries can be used in order to achieve longer running times.
Find out what could you do with your VR360 minicablecam
Virtual tour through a factory
Virtual visit to a museum
Flying over the river
20 day money back guarantee
Best prices in professional equipments
Free shipping within the EU
No import duties within the EU
No import duties within the EU
From: 870,00€ IVA/TAX excl.
The perfect motorized system for flying your VR360 camera
- Size: 15.5*12*18.5 cm
- Weight: 770 g
- Minimum speed: 5 mm/s
- Maximum speed: 1375 mm/s
- Horizontal loading capacity: 6 Kg
- Modes: Manual, Automatic, Timelapse, Stopmotion, Multipoint
- Camera tilt fitting
- Wireless remote controller
- Protective silicone case for the remote controller
- 2 12V batteries
- Battery serial connector adapter
- MicroUSB wire (for firmware updates)
- USB wire (for remote controller)
- 12V power supply/charger
- 100 meters of nylon monofilament cable of 2.5 mm/diameter