Mod Slider

Power On and Synchronization

As shown in the video, the Remote Control will pair with the Slider automatically. The INT icon indicates the Remote Controller battery level, and the EXT icon shows the Slider battery level. When the Slider is connected to your Power Supply, this icon will appear fully black.

Battery Charging

Discover the proper method for charging the batteries efficiently.

Battery Series Connection

An easy way to extend the autonomy of your slider.

Charging the Wireless Controller

You can use a Wall Connection, a Power Bank, or a PC to charge your Remote Controller. If you have a Joystick Extension Dock, you can use its USB port directly.

Wireless Controller Operation

Long click to turn on. Rotate the wheel to navigate through the different options. Click to accept, and long click to go back. If you long-click on the Main Screen, the Remote Controller will turn off.

Module Assembly (Disassembly)

Steps for assembling and disassembling the Panning, Tilting and Follow Focus modules.

Tilt Adjustment Plate

Instructions for installing the Tilt plate accessory and balancing your setup.

Rotary Table Accessory

The ideal complement for working in Turntable Mode, creating sequences for Live Video or Photo360.

Connection with Dragonframe

How to connect the Noxon slider with Dragonframe for Stop-Motion Animation.

Slider Power On/Off Recommendation

Long press the Slider. After the “beep,” your equipment will be ready to use. Keep in mind that the motors are “secured” when the Slider is ON, so please be careful when turning the equipment off.

Working with 2 Sliders separately

In this example, both Sliders are on Channel 4. We need to change one of them to a different Channel.

To do this, you have to turn off one Slider. After that, you can change the Channel from your Controller. The active Slider will change to the same channel (Channel 2 in this case).

Now, one Slider is on Channel 4 and the other on the Channel 2.

Camera Trigger Control

Every camera has its own Shutter Release Port, so you need to find the correct one. Keep in mind the Slider uses a 2.5mm Minijack connection to control the shots.

Rail Replacement

Instructions for changing the rails on the slider.

Mounting Options

Explanation of the different mounting options available for the Slider.

Counterweight Accessory

An easy way to increase smoothness in a vertical position.

FlightCase

This is a great option to carry your Slider safely. If your airplane crashes, your Slider is more likely to survive than you.

Manual Mode

You can change the module you are controlling by clicking the wheel in the Control Screen. It’s recommended to Set Limits (you can do this in Manual Mode) to avoid problems controlling the traveling in any mode. The Ping Pong mode keeps the movement constant instead of stopping after reaching a limit.

Automatic Mode

Discover the power of our slider’s automatic mode! Configure keypoints to effortlessly achieve complex shots with precision and ease. Perfect for dynamic and professional filmmaking.

Timelapse Mode

You need to connect the Shutter Release Cable between the Camera and Slider to automatically take pictures at each point. The system will calculate the number of shots you need based on the Final Clip Time you set and the FPS you want. If you like, you can experiment with the Exposure Time in the proper menu.

Stop-Motion Mode

You can easily navigate through the different frames, allowing you to work at any point in your timeline to create the perfect sequence. The system will automatically calculate the number of shots needed based on the Final Clip Time and FPS settings.

TurnTable Mode

There are two ways to work with the Rotary Table: for Live Video or Photo360. Set the rotation angle in the Angle parameter. If working with Live Video, set the movement speed. For Photo360, set the number of shots and the interval time using the Shots and Interval parameters.

Joystick Extension Dock

You can use the Remote Controller with the Joystick Extension Dock. This offers additional features on your Remote Controller Screen.

Dragonframe Tutorial

The Dragonframe plugin is required for the wireless controller.

Technical Information

Download Here

Esta empresa ha recibido una subvención del Gobierno de Navarra al amparo de la convocatoria de 2020 de ayudas para mejora de la competitividad.
Esta empresa ha recibido una ayuda cofinanciada al 50% por el Fondo Europeo de Desarrollo Regional a través del Programa Operativo FEDER 2014-2020 de Navarra.