The Noxon Transmission Kit is a really useful tool to extend the reach of your cinema gear. You can connect your gimbal or camera to use the native control apps from each brand.
However, proper setup is required to make it work. Nothing complicated, especially with the right instructions.
Please note that the following instructions are specifically for connecting your DJI RavenEye to your Ronin gimbal.
What Includes the Noxon Transmission Kit
You will find in the package:
- 1x Tripod
- 1x Directional Antenna
- 1x Wireless Access Point
- 1x Ethernet Cable
- 1x Power Supply
Note: Depending on when you received your Transmission Kit, some elements may vary. We will do our best to keep this information updated.
Make the Connections
Connect your Antenna to the Wireless Access Point. You need to put this cable in the Yellow Port.
Connect the Wireless Access Point to your PC/Mac using an ethernet cable. Plug the cable into any of the ports marked “2,” “3,” or “4”. Also, connect the Wireless Access Point to the Power Supply.
Raveneye’s Configuration
Now, you need to set up your Raveneye. Move to your PC/Mac and follow the instructions in the next video.
You will find the information to set up your RavenEye here:
Now, connect your Raven to your Ronin.
Setting up your Mobile
Connect your device to the “NoxonLink” network and open the DJI App on your device. Here is the password:
NoxonLink
Use your DJI App
Now you are able to control your Gimbal with an extended reach.
If you discover any trouble in the process, please double-check all the elements and review all the steps again. Sometimes it could be just something easy like your ethernet cable is not connected properly or the RavenEye running out of battery.
If you are still experiencing issues after that, please contact us at info@noxon.tech
